Instructions
Step 1
Perform a hair strand test before using the product
Step 3
Apply 70 to 100 ml of product at least 1 centimeter from the root, remove the excess with a fine comb
Step 5
Rinse and partially or completely remove the product depending on hair type
Step 7
Divide the hair into fine strands and run the iron 15 to 20 times per strand, at a temperature of 180º (for blonde and weakened hair 230º (max. for normal hair).
Step 9
Finish as you wish.
Step 2
Wash your hair and dry it with a hairdryer
Step 4
Leave to act for 45 to 60 minutes
Step 6
Using a hairdryer, with or without a brush, dry your hair completely.
Step 8
Allow hair to cool, then rinse to remove remaining product
Hair strand test
Precautions
-
Select one section of hair from the top of the head, made up of weaker strands, and another at the back of the head, made up of more resistant strands.
-
Proceed as indicated in the instructions for use. Observe the evolution of the smoothing, check the resistance of the fibers.
-
Do not exceed the maximum break time of 60 minutes.
-
Check for any unwanted changes.
-
If in doubt about hair strength or breakage, do not apply the product.
-
Professional use.
-
External use.
-
Follow the instructions for use carefully.
-
Use appropriate gloves.
-
Keep out of reach of children.
-
Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water.
-
Do not use if scalp is irritated or injured. If irritation occurs, discontinue use and consult a doctor.
-
Use in well-ventilated areas.
-
For use in pregnant or breastfeeding women, consult a doctor.
-
Do not use in case of allergies or sensitivity to any of the components of the formula.
-
Store in a cool place and away from light.